Kinco MK070E-33DT HMI+PLC

Kinco MK070E-33DT is an industrial all-in-one device that combines a 7-inch HMI and a built-in PLC in one housing. It belongs to the Kinco MK series and is intended for compact automation systems, machines, dosing equipment, packaging units, conveyors, and other industrial applications where visualization and control logic are needed in a single product. (en.kinco.cn)

The MK070E-33DT combines HMI, PLC, and IoT-oriented functions. Kinco states support for remote program upload/download, transparent PLC communication through the network, VNC remote monitoring, device management, standard Ethernet, USB expansion, and support for Kinco KS expansion modules. (en.kinco.cn)

Short description:
Kinco MK070E-33DT is a practical solution for local machine control where mimic diagrams, operator buttons, recipes, alarm messages, event logs, and PLC logic are required without using a separate HMI panel and a separate controller. The HMI section is configured in DTools, while the PLC section is programmed in KincoBuilder. (en.kinco.cn)

Technical specifications of MK070E-33DT:

• Device type: integrated HMI + PLC
• Series: Kinco MK Series
• Display: 7″ TFT
• Resolution: 800 × 480
• Colors: 256K colors
• Brightness: 250 cd/m²
• Backlight: LED
• Touch panel: 4-wire resistive, 4H
• Backlight life: 50,000 hours
• HMI CPU: 700 MHz RISC
• HMI memory: 128 MB Flash + 64 MB DDR2 RAM
• Recipe memory: 256 KB + RTC
• Expansion memory: 1 × USB Host
• HMI program download: USB Slave / Ethernet / USB Flash Disk
• Printer port: USB
• HMI software: DTools + EdgeAccess + Kinco Miot
• Ethernet (HMI): 10/100M self-adaption
• PLC power supply: DC24V
• Voltage range: DC20.4V–28.8V
• Digital inputs: 16 × DC24V
• Digital outputs: 14 × DC24V
• Analog inputs: 2 × AI
• Analog outputs: 1 × AO
• Analog signal type: supports voltage and current type
• PLC serial ports: 2 × RS485
• Baud rate: up to 115.2 kbps
• Supported communication: Modbus RTU master/slave, free protocol
• Expansion modules: up to 8 Kinco KS modules
• High-speed counters: 4, max 50 kHz
• High-speed outputs: 4; Q0.0 / Q0.1 / Q0.4 up to 50 kHz, Q0.5 up to 10 kHz
• Interrupts: 4, inputs I0.0–I0.3
• Program capacity: up to 4K instructions
• User data memory: M area 1 KB; V area 4 KB
• Backup memory: EEPROM, 448 bytes
• Retentive range: VB0–VB1907; C0–C63
• RTC: built-in, deviation less than 5 min/month at 25 °C
• Overall dimensions: 204 × 150 × 38.55 mm
• Cutout size: 192 × 138 mm
• Front protection: IP65
• Operating temperature: open equipment -10 to +55 °C; enclosed equipment 0 to +50 °C
• Humidity: 10–95% RH, non-condensing
• Installation altitude: up to 2000 m
• Standards / certification: CE, IEC61131-2 / GB/T 15969.3-2007. (en.kinco.cn)

kinco_mk_series